All Prices In NZ Dollars 
AEMC MN03 AC Current Probe
$325.00
Tax excluded
Small and compact, the AC Current Probe Model MN03 is the ideal complement for any multimeter to measure AC currents in low-power secondary or industrial applications.
When used with an AC voltmeter, it allows you to directly read the current measured on the voltmeter.
Maximum Conductor Size 0.39" (10mm)
Current Range 100Arms AC
Measurement Range 1 to 100A
Output 5ft (1.5m) lead with 4mm safety banana plug
Transformation Ratio N/A
Output Signal 100AAC/0.1VAC (1mV/A)
Accuracy 50/60Hz 2% R ± 50mA
Frequency Range 48 to 500Hz
Phase Shift At 50Hz N/A
Open Secondary Voltage N/A
Load Impedance 1MΩ
Overload 150A Permanent
Dimensions (H x W x D) 4.43 x 1.48 x 1.02” (112.5 x 37.5 x 26mm)
Weight With 24” (610mm) Sensor 6.5 oz (180g)
Operating Temperature 14° to +122°F (-10° to +50°C)
Storage Temperature -40° to +176°F (-40° to +80°C)
Operating Humidity 90% RH
Pollution Degree 2
Ingress Protection (Ip) IP40
EMC EN 61326-1
Safety Compliance EN/IEC 61010-1 600V CAT III,
EN/IEC 61010-032
AEM 2129.18
Small and compact, the AC Current Probe Model MN03 is the ideal complement for any multimeter to measure AC currents in low-power secondary or industrial applications.
When used with an AC voltmeter, it allows you to directly read the current measured on the voltmeter.