All Prices In NZ Dollars 
AEMC 275 HVD Non Contact Voltage Detector
The AEMC Model 275HVD is designed to detect the presence of high voltage without physical contact. An 8 position rotary switch selects the detection range. As the sensor is moved closer to the voltage carrying conductor, its sensor head picks up the radiated electric field. Once the threshold is reached, the buzzer sounds and a bright red warning light alerts the operator of live conductors.
The Model 275HVD is powered by three standard Alkaline C cell batteries and can be used both in- and out-of-doors. A universal spline on the back-end facilitates attachment to any standard hot stick. A self-test position ensures that all circuitry and annunciators are working properly before use.
| Detection Frequency | 45 to 70Hz |
| Ranges | 240V, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, 275kV |
| Indicator | Bright red LED and audible buzzer |
| Detection | Non-contact. Selection range is detected at approximately 10” (25cm) from the voltage. Greater detection distances can be obtained at lower voltage positions. |
| Self-Test | User selectable |
| Power Source | 3 x 1.5V C cell batteries (included) |
| Weight | 1.3lbs (590g) with battery |
| Operation Temperature | 5° to +130°F (-15° to +55°C) |
| Storage Temperature | -4° to +150°F (-20° to +65°C) |
| Relative Humidity | 0 to 93% at 104°F (40°C) |
| Shock Test | IEC 68-2-29 |
| Vibration Test | EN 61010 clause 8.3 |
| Drop Test | EN 61010 clause 8.4 |
| Impact Test | EN 61010 clause 8.2 |
| Safety Compliance | CE Approved |
AEM 275 HVD
The AEMC Model 275HVD is designed to detect the presence of high voltage without physical contact. An 8 position rotary switch selects the detection range. As the sensor is moved closer to the voltage carrying conductor, its sensor head picks up the radiated electric field. Once the threshold is reached, the buzzer sounds and a bright red warning light alerts the operator of live conductors.
The Model 275HVD is powered by three standard Alkaline C cell batteries and can be used both in- and out-of-doors. A universal spline on the back-end facilitates attachment to any standard hot stick. A self-test position ensures that all circuitry and annunciators are working properly before use.