All Prices In NZ Dollars 
RigExpert AA-3000 3 GHz cable analyser
$2,095.00
Tax excluded
Customers outside of New Zealand, such as Australian and Pacific Islands, to avoid paying GST, please call our Australian or New Zealand numbers and we will arrange the sale.
AUS:+61 2 913 96 981 NZ: +64 9 448 2600
The flagship Antenna and Cable analyzer with a range from 0.1 to 3000 MHz and a Big Blanview® ZOOM display.
- Stay connected from Earth to space.
- Perfect for amateur, professional, and commercial radio.
- Check and adjust antennas quickly.
- Measure cable length and velocity factor.
- Set up 1/4-λ, 1/2-λ stubs.
- Find cable faults in a snap.
- Measure parameters of other RF elements.
- Enjoy the Big sunlight-readable Blanview® display.
- Trust the factory calibration.
- Navigate the multilingual intuitive interface.
Get help at the push of a button with the built-in Helper.
Store OSL calibration data for future use.
Silicone case, battery charger, rechargeable batteries, USB cable, N to UHF adapter in the box.
See review:
Frequency range: 0.1 to 3000 MHz
Frequency entry: 1 kHz resolution
Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohm systems
SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes
R and X range: 0…2000, -2000…2000
Display modes: Cable tools (stub tuner, length & velocity factor, cable loss and characteristic impedance measurement, LC meter, Multé), Optional open-short-load calibration, R, X chart, Return loss chart, Smith chart, SWR at single or multiple frequencies, SWR chart, SWR, return loss, R, X, Z, L, C at single frequency, TDR chart (Time Domain Reflectometer), User OSL: 10 profiles available
Optional open-short-load calibration in SWR, R, X, or Smith/polar chart graph modes.
RF output:
– Connector type: N
– Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used.
– Output power: -10 dBm (at 50 Ohm load)
Power:
– Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA
– Max. 5 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used
– When the analyzer is connected to a PC or a DC adapter with a USB socket, it takes power from these sources
Interface:
– 800*480 color BlanView display
– 6×3 keys on the water-proof keypad
– Multilingual menus and help screens ( English / German / French /Spanish / Portuguese / Italian / Japanese / Ukrainian / Russian)
– USB connection to a personal computer
– Bluetooth v. 4.2 (Single-mode, Class B)
Accessories inside the box: Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
Dimensions: 23x10x5.5 cm (9x4x2”)
Operating temperature: 0…40 °C (32…104 °F)
Weight: 420g (15.6 oz)
Warranty: 2 years RigExpert Care
RPT AA-3000
Customers outside of New Zealand, such as Australian and Pacific Islands, to avoid paying GST, please call our Australian or New Zealand numbers and we will arrange the sale.
AUS:+61 2 913 96 981 NZ: +64 9 448 2600
The flagship Antenna and Cable analyzer with a range from 0.1 to 3000 MHz and a Big Blanview® ZOOM display.
- Stay connected from Earth to space.
- Perfect for amateur, professional, and commercial radio.
- Check and adjust antennas quickly.
- Measure cable length and velocity factor.
- Set up 1/4-λ, 1/2-λ stubs.
- Find cable faults in a snap.
- Measure parameters of other RF elements.
- Enjoy the Big sunlight-readable Blanview® display.
- Trust the factory calibration.
- Navigate the multilingual intuitive interface.
Get help at the push of a button with the built-in Helper.
Store OSL calibration data for future use.
Silicone case, battery charger, rechargeable batteries, USB cable, N to UHF adapter in the box.
See review: