Eleven Auto – PCB Proto Typing Machine
Auto Lab replaces Eleven Auto. This model employs Auto-Tool-Change mechanism and achieves a low price, while its specification exceeds Eleven Auto. Up to 10 tools are available for automatic tool change. The standard spindle motor is made in Japan with high quality and less runout. Tool change employs the electrical function without using the air compressor.
(Note: Spindle motor installed on Auto Lab 100 is not made in Japan. Air compressor required.)
We are GST registered in New Zealand and we charge in New Zealand Dollars. Foreign-based customers please email us or call our Australian or New Zealand numbers below and we can manually process the sale without New Zealand GST. For Australian customers we can also invoice in AUD and you can pay into our Australian bank account to minimise bank fees and complexities.
Â
Please note that you may be assessed for your countries duties and taxes on import as per your local regulations.
Â
- Description
Description
|
Model |
Auto Lab |
|||||||
|
Minimum pattern width (mm) |
0.1 (4 mil) |
|||||||
|
Minimum milling width (mm) |
0.1 (4 mil) |
|||||||
|
Working area (X/Y/Z) (mm) |
229 x 300 x 45Â *7 |
|||||||
|
Table size (X/Y) (mm) |
296 x 370 (11.6″ x 14.5″) |
|||||||
|
Control axis |
X, Y, Z |
|||||||
|
Control motor |
Stepper Motor |
|||||||
|
Resolution (µm) *3 |
0.156 (0.00614 mil) |
|||||||
|
Maximum Travel Speed (mm/sec.)Â *1 |
55 (2.17″) |
|||||||
|
Spindle speed min-1Â (rpm) |
5,000 – 62,000 |
|||||||
|
Drilling (mm) |
0.2 – 3.175 (8 – 125 mil) |
|||||||
|
Maximum drilling cycle (cycles/min.)Â *2 |
55 |
|||||||
|
Maximum thickness of processed material (mm)Â *4 |
30 (1.18″) |
|||||||
|
Tool change |
Automatic / 10 |
|||||||
|
Milling method |
Absolute |
No |
||||||
|
Incremental |
Yes |
|||||||
|
Compressed air (Mpa) |
—– |
|||||||
|
Power consumption |
100 – 240 V, 50-60 Hz, 200VA |
|||||||
|
Machine dimensions |
435 x 575 x 430 (17.2″ x 23″ x 17″) |
|||||||
|
Machine weight (kg) |
Approx. 34 (76 lbs) |
|||||||
|
Interface |
One USB or one RS-232C port |
|||||||
|
Standard equipment |
Fiducial positioning camera 30x (USB)*5 |
|||||||
|
Options and accessories |
Cabinet (requires assembly) |
|||||||
|
Starter kit |
Connecting Cable (RS232C / USB)
|
|||||||
*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill’s up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 The smallest traveling figures for ordering each 3 axes movement.
They do not represent the accuracy of axis positioning.
*4 Value of the thickness of the material on the work table.
This value does not show the maximum drilling stroke.
*5 Maximum useful magnification depends on the size of the screen.
*7 z-axis stroke 50mm
