| LanTEK II |
| Handset Dimensions |
Height/Width/Depth: 10in/5in/2.1in (25.4cm/12.7cm/5.3cm) |
| Handset weight w/ battery |
Display: 2.4lbs/1.1kg; Remote: 2.3lbs/1.0kg |
| Battery |
Lithium ion, 7.4VDC, 6.6AH; Input: 12V/2A DC; Typical operating time:
18 hours (new battery running a Cat6 test every 2.5 minutes, full
backlight); Charge time: 4 hours quick charge with battery removed from
handset, 6 hours inside handset. |
| Input power |
Handset: DC 12-15V, 2A; Line/mains power: AC 110-240V |
| Display |
4.3′ wide screen TFT, 480 x 272 pixel, 95 x 54mm viewable area |
| Connectivity |
Adapter port: 168 pin ultra low crosstalk, mini-USB device port, USB host
port (display handset only), four pin serial port (service use only), 1/8″
talkset jack, power/charging jack |
| Frequency range |
LanTEK II-350: 1-350MHz, LanTEK II-500: 1-500MHz, LanTEK II-1000:
1-1000MHz |
| Memory |
Non-volatile flash, storage capacity for 1700 TIA-Cat 6 tests with graphs.
Tests can be copied to USB flash drive, up to 64GB. |
| Measurements |
Wire map, DC loop resistance length, capacitance, NEXT, insertion loss
(formerly attenuation), ACR-N (formerly ACR), return loss, average
impedance, propagation delay, delay skew, power sum NEXT, power sum
ACR-N (formerly power sum ACR), ACR-F (formerly ELFEXT), power sum
ACR-F (formerly power sum ELFEXT), alien crosstalk (with optional AXT
testing kit) |
| Length measurement |
0-2000 ft.; 1 ft. resolution, +/-(3% + 3 ft.) |
| Supported cable types |
TIA/EIA Category 3, 4, 5, 5E, 6 and 6A: 100O
ISO/IEC Class C, D, E, EA, F, FA: 100O
Cat 6/6A Class E/EA RJ-45 permanent link adapters: shielded and
un-shielded cable, universal adapters provide channel, permanent link and
basic link measurements. |
| Supported connectors |
Additional adapters: GG45, ARJ45, TERA, EC7 (MMCPRO3000), Coax
50-75O (BNC connector), M12 industrial |
| Tone generator |
Integrated into display and remote handset, compatible with standard
analog inductive probes, selectable tone (high/low/warble) 500/600 Hz,
selectable pin output. |
| Input protection |
100V @ 25mA |
| Operating temperature |
0°C to 50°C, non-condensing |
| Storage temperature |
-20°C to 70°C, non-condensing |
| Vibration/shock |
MIL-PRF-28800 F, Class 3 |
| Supported languages |
Chinese, Czech, Danish, Dutch, English, French, German, Italian,
Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish |
| Accuracy |
Baseline: Certified by ETL to meet IEC 61935 Level III/IIIe/IV;
Channel/Permanent link: TIA 568-B.2-2 and IEC 61935 Level III/IIIe/IV |
| Warranty (LanTEK II/FiberTEK FDX) |
One (1) Year from date of purchase
Batteries and accessories are warranted 90 days from date of purchase |
| PC Software |
Requirements: Microsoft Windows® XP or Vista, 512MB RAM, 500MB
hard disk + 1GB for every 1,500 Category 6 tests |
| FiberTEK FDX |
| Compatability |
LanTEK II (any model) |
| Connector |
User changeable adapter (SC, FC, ST), 2.5mm ferrule |
| Laser safety |
Multi-mode 850 VCSEL: class 3, 5mW max; multi-mode 1300 laser:
class 3, 5mW max; Single mode 1310 & 1550: class: 3, 5mW max |
| Power meter accuracy |
± .5dB from 0dBm to -40dBm 850-1550nm; system dynamic range 40dB |
| Length accuracy |
±3%; maximum distance measurement 3000m |
| Display resolution |
Power/attenuation: 0.1dB, length: 0.1m/0.1ft |
