PEL-3000/3000H Series Programmable DC Electronic Load
Features
Operating voltage (DC)：0~150V(PEL-3000)/ 0~800V(PEL-3000H)
Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV
Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)
Support of High Slew Rate：Max. 16A/us((PEL-3000)/ 0.84A/us(PEL-3000H)
Run Program Function（GO/NO GO Test）
Sequence Function for High Efficient Load Simulations
Dynamic(Switching) Function：0.0166Hz ~20kHz
Soft Start Function：Off / On(1~200ms, Res：1ms)
Adjustable OCP / OVP / OPP / UVP Setting
Short Circuit Function
Timer function : Elapsed Time of load on
Cut Off Time(Auto Load Off Timer )：1s to 999h 59min 59s or Off
External Channel Control / Monitoring via Analog Control Connector
Setup Memories：100 sets
3.5 Inch TFT LCD Display
Multi Interface : USB 2.0 Device / Host , RS-232 , GPIB / LAN (Optional)
PEL-3000E Series DC Electronic Load
Features
7 Operating Modes: CC, CV, CR, CP, CC+CV, CR+CV, CP+CV
Fast/ Normal Sequence Function
Soft Start
Battery discharge test
OCP、OPP test Automation
Max. Slew Rate: 2.5A/us
Dynamic mode
Protection: OVP, OCP, OPP, OTP, RVP, UVP
Remote Sense
Integrate voltage, current and power measurement functions
External Voltage or Resistance Control
Rear Panel BNC、Trigger IN/OUT
Analog External Control
USB/GPIB(Optional)
PEL-500 Series DC Electronic Load
The PEL-500 series is single-channel electronic load that has a total of 5 models and provides 0~80V/ 0~500V voltage operating ranges and 250~700W power operating range.
Application:
R&D, quality control, ATE system and production test, including voltage source/current source test; switching power supply transient response; constant voltage mode for current limiting test; battery simulation; and battery discharge test.
PFR-100 Series Fanless Multi-Range D.C. Power Supply
Features
- Constant Power Output for 5 Times Multi-range(V&I) Operation
- Natural Convection Cooling Design (Fanless Structure)
- Preset Memory Function
- Output ON/OFF Delay Function
- CV, CC Priority Mode
- Adjustable Slew Rate For Voltage and Current
- Bleeder Circuit Control
- Protections: OVP, OCP, AC FAIL and OTP
- Support Front and Rear Panel Output
- Built-in USB and RS-232/485 Interface Optional LAN+GPIB
- Web Server Monitoring and Control
- External Analog Control and Monitor Function
- Remote Sensing Function
PFR-100 Series Fanless Multi-Range D.C. Power Supply
Features
- Constant Power Output for 5 Times Multi-range(V&I) Operation
- Natural Convection Cooling Design (Fanless Structure)
- Preset Memory Function
- Output ON/OFF Delay Function
- CV, CC Priority Mode
- Adjustable Slew Rate For Voltage and Current
- Bleeder Circuit Control
- Protections: OVP, OCP, AC FAIL and OTP
- Support Front and Rear Panel Output
- Built-in USB and RS-232/485 Interface Optional LAN+GPIB
- Web Server Monitoring and Control
- External Analog Control and Monitor Function
- Remote Sensing Function
Ordering Info:
PFR-100M (0~250V/ 0~2A / 100W) Fanless Multi-Range DC Power Supply
PFR-100L (0~50V/ 0~10A/ 100W) Fanless Multi-Range DC Power Supply
Phenix Aerial Lift Test Set
MOBILE AC DIELECTRIC TEST SETS
FOR AERIAL LIFT, ELEVATED PLATFORM,
INSULATED BOOM TESTING
Complies with the latest ANSI A92.2 and
IEC 61813 standards. Also, capable of
testing double and horseshoe liners. The
standard safety features combined with
advanced metering make these test
systems the premium choice for testing
single trucks to maintaining a whole fleet.
Phenix PM10A
Phenix Technologies’ line of Insulation Analysers perform multiple testing functions including:
Insulation Resistance
Dielectric Absorption Ratio
Polarization Index
Capacitance
Leakage Current
Guarded Current measurements
Step Voltage
Pass/Fail test
Low Resistance and Continuity measurement
AC/DC Voltmeter up to 600 V True RMS
Phenix PM15-4A
Phenix Technologies’ line of Insulation Analyzers perform multiple testing functions including:
Insulation Resistance
Dielectric Absorption Ratio
Polarization Index
Capacitance
Leakage Current
Guarded Current measurements
Step Voltage
Pass/Fail test
Low Resistance and Continuity measurement
AC/DC Voltmeter up to 600 V True RMS
Phenix PM1A
Phenix Technologies’ line of Insulation Analyzers perform multiple testing functions including:
Insulation Resistance
Dielectric Absorption Ratio
Polarization Index
Capacitance
Leakage Current
Guarded Current measurements
Step Voltage
Pass/Fail test
Low Resistance and Continuity measurement
AC/DC Voltmeter up to 600 V True RMS
Phenix PM5A2
Phenix Technologies’ line of Insulation Analyzers perform multiple testing functions including:
Insulation Resistance
Dielectric Absorption Ratio
Polarization Index
Capacitance
Leakage Current
Guarded Current measurements
Step Voltage
Pass/Fail test
Low Resistance and Continuity measurement
AC/DC Voltmeter up to 600 V True RMS
Physiology Extension Bundle, PS-2935C
This collection features some of the most commonly used sensors for human physiology.
WHAT'S INCLUDED
- 1x PASPORT EKG Sensor (PS-2111)
- 1x PASPORT Spirometer (PS-2152)
- 1x Spirometer Mouth Pieces (PS-2522)
- 1x Wireless Blood Pressure Sensor with Standard Cuff (PS-3218)
- 1x Wireless Hand Grip Heart Rate Sensor (PS-3206)
- 1x AirLink Interface (PS-3200)
WHAT TO CONSIDER
See the Buying Guide for this item's required, recommended, and additional accessories.
Pipe and Cable Locator - CAT4+ and Genny4 Kit
Radiodetection’s C.A.T4 and Genny4 offer a comprehensive range of Cable Avoidance Tools designed to provide operators with locators that are both simple to operate and offer a range of options and features to improve survey speed and accuracy.