Anritsu Spectrum Master MS2711E
THe Anritsu MS2711E locates and identifies out-of-band spurious signals when analyzing wireless base station transmitters, the field strength mode measures propagation, coverage, and pinpoints electromagnetic leakage
APPA 11 Thermocouple Module
APPA 33 AC Current Clamp Meter – 600A
APS-7000 Series Programmable Linear AC Power Sources
Features
- 4.3-inch TFT-LCD
- Output capacity : APS-7050(500VA、310Vrms、4.2Arms)；APS-7100 (1000VA、310Vrms、8.4Arms)；APS-7200(2000VA、310Vrms、16.8Arms)；APS-7300 (3000VA、310Vrms、25.2Arms)；Output augmentation by options (0~600Vrms/45~999.9Hz)
- Low Ripple & Noise
- Measurement and test functions include VOLT、CURR、PWR、SVA、IPK、IPKH、FREQ、PF、CF
- Support a small AC current measurement 2mA ~ 35A, Min. resolution 0.01mA(APS- 7050& APS-7100)
- Reverse Current Alarm Function
- 10 sets of Sequence function to Edit Output Waveforms/ 10 sets of simulate mode to Rapidly Simulate Transient Power Supply/ 10 sets of Program mode to Define Measurement Sequence/ 10 sets of Panel Memory Function
- Automatic Execution of Sequence、Simulate、Program mode and Output Function when the Power is on
- Standard Interfaces: USB Host, USB Device, LAN
- Optional Interfaces: GPIB (APS-001)；RS-232 / USB CDC(APS-002 for APS-7050& APS-7100 only)；RS-232(APS-007 for APS-7200& APS-7300 only)
APS-7000E AC Power Sources
Features
- 4.3 inch TFT-LCD Display
- Output Capacity: APS-7050E(500VA, 310Vrms, 4.2/ 2.1Arms), APS-7100E(1000VA, 310Vrms, 8.4/ 4.2Arms)
- Only 88mm(2U) case height
- Measurement function comprises Voltage, Current, Power, Current(peak), Frequency, Power Factor
- 10 sets of the Test mode simulate power transient output
- 10 sets of Preset allow users to store ten settings
APS-9000
Features
- True RMS Meter
- Wide Output Voltage / Frequency Variable Range
- Save/Recall 4 Sets of Voltage/Frequency Memory
- Over Current Protection and Over Temperature Protection
- Stable and Low-Distortion Output Waveforms
- Software Calibration to Ensure Accuracy
- Panel-Lock Function to Prevent Operation Error
- Frequency,Volt,Amp,Watt and Power Factor Display
Arbitrary Microwave Generators SE5082
5GS/s Dual-Channel Arbitrary Waveform Generator:
The new Signal Expert Series sets new standards for high speed arbitrary waveform generators. With an analog bandwidth of nearly 7 GHz, the new Signal Expert Series can reach frequencies much higher than its sampling rate. Combining this vast analog bandwidth with multi Nyquist zone operation the Signal Expert Series is capable of solving applications well beyond baseband and into the microwave frequencies.
Download DataSheet
ART3V RELAY TEST SYSTEM
The ART3V has a colour back-lit display to provide an easy to read user interface. Menu options are selected by dedicated buttons on the panel, allowing easy mode change. All information is displayed including contact set status, and a phasor diagram.
The ART3V Relay Test System is ideally suited for testing G59/G99 protection, including loss of mains protection. Vector surge and df/dt (ROCOF) relays can be simply tested and timed, as well as other protection requiring one to three voltages
ART3V RELAY TEST SYSTEM
3-f Voltage output from 1-f supply
0-450V f-N output voltage
20VA/phase maximum output
Variable Frequency 30-999.9Hz
Phase shift ±180.0°
Multi-function timing system
USB keyboard for comment
USB data storage.
Ideally suited to testing G59 & G99 schemes
Step change of phase and df/dt
Large 6.5” back-lit colour LCD
Automatic mains voltage selection
Fully Programmable test procedures
Rugged case and weighs under 9kg
ASR-2000 Series Programmable AC/DC Power Source
Features
- Output Rating: AC 0 – 350 Vrms, DC 0 - ± 500 V
- Output Frequency up to 999.9 Hz
- DC Output (100% of Rated Power)
- Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
- Voltage and Current Harmonic Analysis(THDv, THDi)
- Remote Sensing Capability
- OVP, OCP, OPP, OTP, AC Fail Detection and Fan Fail Alarm.
- Support Arbitrary Waveform Function
- Output Capacity: 500VA/ 1000VA
- Customized Phase Angle for Output On/Off
- Sequence and Simulation Function(up to 10 sets)
- Interface: USB, LAN(std.); RS-232+GPIB(opt.)
- Built-in External Control I/O and External Signal Input
- Built-in Output Relay Control
- Memory Function (up to 10 sets)
- Built-in Web Server
ATTEN ST-862D Hot Air station
Feature:
● LCD display screen making control visualization.
● Temperature unite switching function.
● Temperature locking ,timed work function.
● MCU controlled temperature calibration, compensation for constant working .
● Strong air volume with brushless fan.
● Easy to replace with pluggable heater.
● Convertible with straight air and spiral air.
● Auto-sleep function.