Laplace EMC Analyzers SA3000/SA1002
Apart from the maximum frequency, these analyzers are identical. Both analyzers are available with a band A option to cover the range 9KHz-150KHz.
They offer the ability to perform pre-compliance testing and compliance measurements. If measuring conducted emissions, use of a pre-selector is recommended owing to the impulsive nature of conducted...
Laplace EMISSIONS REFERENCE SOURCE
Reference Sources
Reference sources are compact signal sources that facilitate the calibration of EMC test equipment.
The Radiated source (ERS) will check both the site and the measurement equipment. This is particularly important as the greatest source of measurement uncertainty is invariably the site.
Laplace Harmonics & Flicker Analyzer AC2000-A
The Laplace Harmonics and Flicker analyser provides the user with a complete system for testing product compliance with IEC61000-3-2 and IEC61000-3-3. Quick and easy to use, the built-in screen provides a clear pass/fail indication of compliance status, plus a full listing of results for each harmonic, in either tabular of...
Laplace Pre-selectors RF910/RF915
These Pre-Selectors are high specification, switched band filters which track the scanning of the EMC Analyzer. Control is via USB link from the Laplace EMC Engineer software supplied with SA1002 and SA3000 analyzers. Installation and operation is completely automatic, and the filters will synchronize with the analyzer scan without any...
Laplace Synthesizer RFIC-4-6
The Laplace Synthesisers cover both conducted and radiated RF immunity test requirements. The frequency coverage extends from 100KHz to 230MHz for conducted tests (RFIC-4-6) and 30MHz – 6GHz for radiated tests (RF3000/RF6000). They are all controlled from the users PC via a USB link, and powerful Windows software is included...
Laplace Van Veen Loop RF300
Large Loop Antenna RF300
For EMC Emissions Testing of Luminaires according to EN 55015
Fully compliant with CISPR15
Complete 3 axis design.
Fully calibrated, 9KHz—30MHz.
Simple to erect..
Affordable - low cost.
Compatible with any EMC receiver or analyzer.
Download Datasheet
LASCELLS Adjustable Laser Stand
The Lascells Adjustable Laser Stand is the ideal hands-free solution for securing a laser pointer at a user-defined height and angle. The angle can be adjusted through the full 360 degree range, and the height can be adjusted through a range of 10 cm. The acrylic stand has a wide...
LASCELLS Amplified Resonance Tube
Add some volume to your Physics Labs with the new Amplified Resonance Tube from Lascells: an exciting tool for the demonstration and study of standing waves in air columns. Designed for whole class Kundt’s tube demonstrations (by adding the provided polystyrene beads), impressive striation patterns are easily achievable at resonant...
LASCELLS Bridge Rectifier System
A must for the effective demonstration of this important circuit.
This unit contains a bridge rectifier circuit with LEDs showing which diodes are conducting during each half cycle of the AC supply. The clear front panel label shows the current path at each stage through the on-board load resistor. In addition...
LASCELLS Capacitor Investigation
This apparatus provides a self-contained unit to enable students to study the charge and discharge characteristics of a capacitor.
The large value of C (0.01 F) and the resistor chosen give a time constant of about 50 seconds so that students can easily take a manual set of readings for plotting...
LASCELLS Colour Filter Set
Flexible acetate transmission filter material suitable for making slides for colour mixing experiments or any work involving coloured light. Each pack contains 7 x A5 pieces, Primary Red, Primary Blue, Primary Green, Magenta, Cyan, Yellow and Neutral Density. The neutral density material gives 50% light transmission with no colour change.
The...
Lascells Compact Resonance Tube
An alternative to the traditional tube, bucket and tuning fork setup, the Lascells Compact Resonance Tube provides a modern and convenient way to explore standing waves and resonating air columns using water.
The apparatus features two telescopically nested tubes: the outer tube has a sealed base to contain water and a...