Lascells Microwave Set
A set of all three Microwave units:
- LA10-420 Microwave Transmitter
- LA10-430 Microwave Receiver
- LA10-440 Microwave Probe Detector
Lascells' Fiber Optic System
This set provides a rugged, self-contained system for demonstrating and using a fibre optic communications link.
The transmitter offers a choice of modulation – a variable frequency audio tone and a 250 kHz square wave for speed of light investigations. The receiver contains a user variable gain amplifier with integral loudspeaker as well as direct monitoring sockets for an oscilloscope.
The system is completed with 5m and 20m sheathed polymer optical fibre coils terminated with clip housings to mate with the transmitter and receiver units. The wavelength used is in the visible red part of the spectrum and with the modulation set at 1 Hz the pulsing beam can be easily seen so that the fibre optic principle can easily be demonstrated.
Full experimental details included.
LCR-1000 Handheld LCR Meter
Features
- 2.8” TFT Touch LCD
- 50,000 Counts Resolution on Primary and Secondary Display
- 0.2% Basic Accuracy
- Six or Eight Selectable Test Frequencies Depends on Model
- 15 Kinds Measurement Combinations Available
- Test Level Selectable : AC 0.3V/0.7V/1Vrms and DC +/- 1V
- Selectable measurement Speed : Fast 10 Times/s, Slow 2.5 Times/s
- Auto LCR Mode for Automatic Component Type Identification and measurement
- Data Hold
- USB (Virtual COM) Interface for Remote Communication
- Software for Datalogging is Available
LCR-6000 Precision LCR Meter
Features
- 3.5” color LCD
- 5 models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz)
- Consecutive test frequency
- Basic accuracy : 0.05%
- Measuring speed up to 25ms (max.)
- Full frequency range or spot OPEN/SHORT
- 16 major/secondary parameter measurement combinations and two additional monitoring parameters(maximum four different parameters can be shown simultaneously)
- DCR measurement and internal D.C. bias voltage (±2.5V)
- PASS/FAIL judgment
- Auto Level Control (ALC) function
- BIN function provides 9BIN and 1AUX, totally 10 BIN
- 10 steps listed tests to select different frequency, voltage and current criteria
- Standard interface : RS-232C, Handler and USB storage
- Compact size, ideal for automatic equipment (2U,1/2 RACK)
LCR-8000G Precision LCR Meter
Features
- Wide Test Frequency 20Hz ~ 10/5/1MHz
- 0.1% Basic Accuracy & 6 Digits Measurement Resolution
- Large LCD Display with Intuitive Interface
- Full Measuring Functions with DUT V/I Monitor
- PASS/FAIL Function ( abs, % or delta) with Judgment Alarm
- DC Resistance Measurement
- Multiple Step Mode
- Standard RS-232C/GPIB Interface
- Optional DC Bias box
LCR-8200 High-Frequency LCR Meter
Features
- Wide Test Frequency 10Hz ~ 30MHz/20MHz/10MHz/5MHz
- 7” LCD color Display
- 0.08% Basic Accuracy
- Displaying Four Measurement results simultaneously from 17 selectable measurement parameters freely
- 15 steps List Measurement
- Two Curves Sweep Mode
- Internal DC Bias Voltage ±12V
- USB Storage available
- ALC function available
- Standard Interfaces : RS-232C, USB host/device, LAN, GPIB and Handler
- Universal power input