GDS-2000E Series Digital Storage Oscilloscopes
Features
- 200/100/70MHz Bandwidth Selection; 2 or 4 Channels
- 1GSa/s Real-Time Sampling Rate for Each Channel (2ch model) ; 1GSa/s Maximum Real-Time Sampling Rate (4ch model)
- Per Channel 10M Memory depth and VPO Waveform Display Technology
- Waveform Update Rate of 120,000 wfm/s
- 8 ” WVGA TFT LCD Display
- FFT with Maximum 1M points to Provide Higher Frequency Domain Resolution Measurement
- High and Low Pass Digital Filter Functions
- 29,000 Sections of Segmented Memory and Waveform Search Functions
- I2C/SPI/UART/CAN/LIN Serial Bus Trigger and Decoding Function
- Data Log Function Tracks Signal Changes Up To 100 hours
- Provide Remote Internet Storage Function
GDS-300 / GDS-200 Series Digital Storage Oscilloscopes
Features
- 200/100/70MHz Handheld Oscilloscope
- 2 Input Channels
- 1GSa/s Maximum Sample Rate
- Maximum 5M Memory Depth Per Channel
- 7” 800 x 480 Full Touch Panel Capacitive LCD Multi-Point Control, Landscape and Portrait Display
- Built-In 50,000 Counts DMM
- 30,000 Consecutive Waveform Records Logging Function, Replay Measurement Results Any Time
- Temperature Measurement and Logging Function
- Built-In Engineering Calculator, SMD Resistance Coding, Color Coding Info, and Attenuator Calculation Application Software
- Optional Differential Probe to Achieve Isolation Effect
Sale
GDS-320 Digital Storage Oscilloscopes (Ex-Demo unit, only one available)
Features
- 200 MHz Handheld Oscilloscope
- 2 Input Channels
- 1GSa/s Maximum Sample Rate
- Maximum 5M Memory Depth Per Channel
- 7” 800 x 480 Full Touch Panel Capacitive LCD Multi-Point Control, Landscape and Portrait Display
- Built-In 50,000 Counts DMM
- 30,000 Consecutive Waveform Records Logging Function, Replay Measurement Results Any Time
- Temperature Measurement and Logging Function
- Built-In Engineering Calculator, SMD Resistance Coding, Color Coding Info, and Attenuator Calculation Application Software
- Optional Differential Probe to Achieve Isolation Effect
GFC-8010H
Features
- 10Hz ~ 120MHz Range
- 8 Digits Display (0.3"LED)
- 15mV rms High Sensitivity
- 5PPM High Stability Time Base
- Frequency and Period Measurement
- Low Pass Filter Function
- Over-Flow Indicatot
GFC-8270H & GFC-8131H
Features
- Frequency and Period Measurement
- High Resolution at Both High and Low Frequency
- 0.01Hz~2.7GHz Frequency Range(GFC-8270H)
- 0.01Hz~1.3GHz Frequency Range(GFC-8131H)
- 10mV rms High Sensitivity
- 100nHz Resolution for 1Hz Input
- Variable Trigger Level Control
- Microprocessor Controlled Intelligent Counter(only GFC-8270H)
GFG-8200A Function Generator
Features
- Frequency Range: 0.3Hz ~ 3MHz (GFG-8215A/8216A/8217A/8219A)
- Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)
- Waveforms: Sine, Triangle, Square,Ramp, TTL and CMOS Output
- External Voltage Controlled Frequency (VCF) Function
- Two-Steps (-20dBx2) and Variable Attenuator
- Built-In 6 Digits Counter with INT/EXT Function up to 150MHz(Except GFG-8215A)
- INT/EXT AM/FM Modulation (GFG-8219A/8255A)
- GCV Output for Synchronization (GFG-8219A/8255A)
GLC-9000 Leakage Current Tester
Features
- Touch Panel with Color LCD Display
- 9 Different Measurement Network to Simulate the Resistance of Human Body
- 8 Different Types of Leakage current
- Various Leakage Current Measuring Mode：DC/AC/AC+DC/AC Peak
- Upper & Lower Limitation for PASS/FAIL Judgment
- Meter Mode with SELV/CONV Function
- 50 Preset Test Conditions Conform to IEC 60990; 30 Sets Memories for Customer Defined
- Various Standard Interfaces：RS232/GPIB/USB Host & Device/EXT I/O
GLP-1A
Features
- Combining a Logic Probe and Pulser Combined into One
- Probe for Troubleshooting Digital Circuits
- Operating Voltage: 4VDC ~ 18VDC
- Maximum Input Signal Frequency: 50MHz
- TTL: Logic “1”>3.0V±0.25V, Logic”0”<0.75±0.25V
- CMOS: Logic “1”>60%VCC±5%, Logic”0”<15%VCC±5%
- Minimum Detectable Pulse Width: 10nsec
- Pulser: Sync input impedance 120kΩ
- Pulse Repetition Rate: Switchable 0.5/400Hz
- Pulse width: 10μsec
- Dimensions & Weight: 18(W)x210(H)x18(D)mm, Approx. 50g