NoiseKen Lightning Surge Simulator (AC690V/100A)
Custom Model
Features
Test equipment compliant with IEC 61000-4-5 Ed.3 standard
Built-in coupling-decoupling circuit network of AC690V/100A DC125V/50A.
Maximum output voltage of 15kV: Can be used in reliability evaluation testing for lightning surge testing, including destructive testing.
Large LCD screen operation panel: Large LCD panel screen is used in the operation...
NoiseKen Lightning Surge Simulator (DC600V/100A)
Custom Model
Features
Test equipment compliant with IEC 61000-4-5 Ed.3 standard
Built-in coupling-decoupling circuit network of AC500V/50A DC600V/100A.
Maximum output voltage of 15kV: Can be used in reliability evaluation testing for lightning surge testing, including destructive testing.
Large LCD screen operation panel: Large LCD panel screen is used in the operation...
NoiseKen Lightning Surge Simulator （RINGWAVE generator equipped）
Features
Tester compliant with IEC 61000-4-5 Ed.3 standard
The tester can generate 0.5μs-100kHz RINGWAVE as specified in IEC61000-4-12 standard.
(Maximum voltage surge: 12kV high voltage test can be performed.)
Maximum output voltage: 15kV: In reliability evaluation tests for lightning surge tests, destructive tests can also be included.
Adoption of a large...
NoiseKen Lightning Surge Simulator LSS-720B2
This simulator simulates "high-energy induced lightning noise" induced in distribution lines and communication lines due to ground potential fluctuations caused by lightning strikes, and evaluates the resistance of electronic devices.
It is possible to check the dielectric strength due to induced lightning at a level that cannot be confirmed with the...
NoiseKen Lightning Surge Simulator LSS-F03 series
For a stricter test with a maximum voltage of 15 kV
A tester simulatively generates "High energy induced lightning noise" which induced to distribution lines or communication lines by ground potential fluctuation caused by lightning strikes.
Features
Lightning surge simulator compliant with the IEC61000-4-5 Edition 3 requirements
Maximum output voltage 15 kV...
NoiseKen Pulse 2b / 4 Generator BP4610
Pulse 2b : Simulates transients from DC. motors acting as generators after the ignition is switched off.
Pulse 4 : Simulates supply voltage reduction caused by energizing the starter-motor circuits of internal combustion engines, excluding spikes associated with starting.
Features
Compliant tests to ISO 7637-2 (2011) Standard (Pulse 2b generator)
Compliant to...
NoiseKen Spatial Magnetic Field Visualization System (low frequency magnetic field) EPS-02EMFv2 / EPS-02Hv2
EPS-02EMFv2 can save the frequency data of the measured magnetic field, so you can easily identify the countermeasure points.
EPS-02Hv2 can directly read and visualize the data from the magnetic field sensor measurement part. It is very compact and easy to carry, and is convenient for on-site measurement.
Features
The direction of...
NoiseKen Voltage Dip & Swell Simulator VDS-2002
Used to evaluate performance such as malfunctions and functional deterioration due to power supply voltage fluctuations in electronic and electrical equipment.
Simulates the phenomenon of voltage fluctuations and momentary power failures in commercial power supplies (AC100/200V) and evaluates the resistance of electronic equipment.
In addition to the requirements of the international standard...
NoiseKen-Electrostatic Discharge Simulator (ESS series) ESD Simulator ESS-PS1 & GT-31S
Make your electrostatic testing easier!
This tester simulates the electrostatic discharge phenomenon from a charged human body and evaluates the resistance of electronic devices to electrostatic discharge.
Electrostatic discharge occurs when a charged human body approaches an operation panel, button switches, or housing of electronic devices. It generates a high-voltage, high frequency...
NoiseKen-Electrostatic Discharge Simulator (ESS series) ESD Simulator ESS-S3011A & GT-30RA
Free you from the hassle of testing by the pre-check function and the weight reduction of the discharge gun
EMC test equipment to evaluate the resistibility of electronic equipment when energy charged on a human body or object is discharged to the electronic equipment.
This can be available for evaluating malfunctions or...
Nortech Miniature Optical Power Meter
Description:A simple, reliable optical power meter for fibre optic signal strength measurements.
Key Features:
Stable optical readings
Wide wavelength compatibility
Compact handheld design
Ideal For:Telecom, FTTH, fibre installation technicians.
Optic- DISCOPTIC et Laser suitcase
Experiments:
Reflection/refraction
Descartes’ law
Kepler’s law
Relation n1 sin i1 = n2 sin i2
Calculation of liquid refraction index
Including:
1 graduated white disk Ø 230mm
To clip on aluminium rail with serigraphy
Magnetic soles under the rail
1 red TRIO laser with power supply
1 semi cylindrical lens Ø200 x 12 mm
1 semi cylindrical tank Ø200 x 20 mm transparent...