T-47/M5 Dual Crypto Test Set
The T-47/M5 Tel-instrument Electronics Corp. newest IFF Test Set.Â
The T-47/M5 capabilities allow full testing, simulation and analysis of the following systems: Interrogator/Transponder Test set for Modes 1, 2, 3A, C, S, EHS, ADS-B TX and RX (compliant) with 4 and Mode 5, TCAS I, II and E-TCAS. Comprehensive testing of TACAN Receiver Transmitters in A/A, G/A, and A/A BCN. Direct Connect and over the Air options. Utilizing the KIV-77 or the KIV-78 Crypto applique (not included) for Mode 4 & Mode 5 testing and built in USB connection available for remote diagnostic testing and download of test results to a PC. Fully Complaint IAW 03-1000A/B and AIMSPO Certified.
Techimp Alfa Portable PD Tester
The ALFATM has been developed for service departments or companies with limited skills in the field of interpretation of PD data. With little effort in training of your staff, you will shortly be able to take PD measurements on your customers assets. With the data sent to our specialists you will receive a comprehensive analysis in return. Like its big brother AQUILATM, the alfaTM has been expressly designed to respond to all requests for a robust and compact portable all-in-one PD testing device for all assets like transformer (HV & MV), cable (HV & MV), rotating machines (generators and motors) as well as switchgear (air- or gas-insulated)
Techimp Aquila Portable PD Tester
TECHIMPs PDPortable AQUILATM has been expressly designed to respond to all requests for a robust and compact portable all-in-one PD detection station providing a full range of options ideal for on field applications. 20+ years of service experience has been condensed in this unit representing a state-of-the-art PD device integrating TECHIMP's innovative PD detection technology (T/F Map) with multiple connectivity (Wi-Fi, Fiber Optics, USB, bluetooth) and power supply. The instrument can be used to set-up a temporary monitoring system for simultaneous testing of HV cable during commissioning. Connection via fiber optic allows creating a network of acquisition units at different measurement points.
Techimp PD Hub Permanent PD Monitoring Syestem
Techimp’s Partial Discharge (PD) Monitoring systems usually consists of a Central Unit and distributed Data Acquisition Units – the PD Hub™ - able to acquire and process the PD signals locally detected through PD sensors installed on each of main electrical assets (generator, transformer, HV cables and GIS).
Telewave 44DL Digital/Analog Broadband RF Wattmeter
The Telewave Model 44DL Broadband RF Wattmeter is a compact, versatile test instrument for the direct measurement of forward and reflected RF powerhttps://electrotest.co.nz/img/cms/Product brochures/Telewave/44DL-DataSheet-220919.pdf
Telewave RF Wattmeter Model 44A
The Telewave Model 44A RF Wattmeter is a compact, versatile instrument used for direct measurement of forward and reflected RF power in a coaxial transmission line under any load conditions. Wide band capability and dynamic range allows operation without elements, inserts, or bandswitching.
The 20 microamp taut-band meter movement is shock mounted in a rugged, diecast housing, making this instrument ideal for mobile radio installation in aircraft or vehicles, as well as base stations.This wideband instrument covers 20 to 1000 MHz with a power range of 1 to 500 watts. The meter movement can be turned off for protection when not in use. A leather carrying strap is provided for easyÂ
Telewave TC44 heavy duty carry case for Wattmeters
The Telewave TC44 Carrying Case is custom made specifically for the Telewave 44 Series wattmeters. It will accommodate the 44A/AP, the 44L1/L1P, and the new 44D. The TC44 features rugged leather construction, with oversize rivets at all joints and a large hand strap. The case also has a compartment at the bottom/rear for storing loads, test cables, or other accessories.
Test cells (LaplaCell): LC300/LC600
LaplaCells provide a facility for rapid and efficient testing of the EMC compliance of products. These cells offer a calibrated and screened environment in which radiated emissions can be measured and immunity to RF radiation can be tested. They exceed the requirements of IEC61000-4-20, thus affording compliant testing to IEC61000-4-3 and pre-compliance testing for radiated emission testing. The Cells are a modified form of GTEM cell, using a balanced dual septum design which maximises EUT volume for a given external size of cell, and dramatically improves field linearity. The EUT volume is fully lined in structural polycarbonate capable of supporting heavy products and access is via a large, full height door at the end of the cell. Adjacent to the door is the I/O filter compartment which can be customised to suit the users requirements. USB, RS232, Parallel, Ethernet, co-ax and other product specific filters can be added at time of ordering.
The Lucid RF signal generator Series
The Lucid RF signal generator Series is geared towards solving applications demanding outstanding dynamic range, fast switching speed, and easy remote programming for seamless system integration, all in a compact module platform. The series was designed to offer industry leading price to performance ratio, delivering a full product portfolio for generating signals for various applications whether, 5G, radar, communications, and more. Â
The Lucid series feature 3, 6, and 12 GHz single channel versions, all sharing the same industry leading highlighted features, in a compact, small footprint module. Featuring extremely fast switching speed, superior signal integrity, and purity, all the necessary modulated signals for analog communication systems, built-in SPI, and micro-USB interface, the Lucid Series is designed to meet today’s most demanding specifications, needed from the R&D benches to the production lines.
THERMODYNAMICS/ Blackbody Radiation Experiment, EX-5529A
The complete solution for demonstrating the blackbody spectrum of light intensity for a light bulb. Great for qualitative analysis.
WHAT'S INCLUDED
- 1x Prism Spectrophotometer Kit (OS-8544)
- 1x Optics Benches (60 cm) (OS-8541)
- 1x Educational Spectrophotometer Accessory Kit (OS-8537)
- 1x Aperture Bracket (OS-8534A)
- 1x PASPORT Broad Spectrum Light Sensor (PS-2150)
- 1x PASPORT Rotary Motion Sensor (PS-2120A)
- 1x Voltage Sensor (unshrouded) (UI-5100)
- 10x Replacement Light Bulbs (10) (SE-8509)
- 5x Banana Plug Cord-Black (5 Pack) (SE-9751)
THERMODYNAMICS/ Electrical Equivalent of Heat Experiment, EX-5525
The complete solution for investigating the relationship between mechanical work and heat. This complete solution is designed for use with PASCO Capstone Software.
WHAT'S INCLUDED
- 1x Energy Transfer - Calorimeter
- 1x PASPORT Temperature Sensor
- 1x Ohaus Triple-Beam Balance (with Tare)
THERMODYNAMICS/ Heat Engine Cycles Experiment, EX-5530B
The complete solution for examining the efficiency of heat engines and compared to the ideal gas law.
WHAT'S INCLUDED
- 1x Heat Engine/Gas Law Apparatus (TD-8572A)
- 1x Large Rod Base (ME-8735)
- 1x Slotted Mass 200g
- 1x Mass and Hanger Set (ME-8979)
- 2x 3-Liter Plastic Tub (2-Pack) (ME-7559)
- 1x Thread
- 1x 90 cm Stainless Steel Rod (ME-8738)
- 1x PASPORT Rotary Motion Sensor (PS-2120A)
- 1x PASPORT Quad Temperature Sensor (PS-2143)
- 1x PASPORT Dual Pressure Sensor (PS-2181)