Frankonia DOUBLE STACKED LOG.-PERIODIC ANTENNA – AXL-200
150 MHz – 4 GHz, For immunity tests acc. to automotive standards
The AXL-200 has especially been designed for the generation of high field strength levels acc. to automotive immunity standards. The small dimensions of the antenna does also allow to keep the min. required distance of 25cm to the floor,...
Frankonia DOUBLE STACKED LOG.-PERIODIC ANTENNA – AXL-80
70 MHz - 4 GHz
For immunity tests and emission measurements
Double-stacked log.-periodic antennas have mainly been developed in order to reach the highest field strength levels acc. to automotive-, avionics- and military standards with as less as possible input power. Antenna gain saves amplifier power!
Download Brochure
Frankonia DOUBLE STACKED LOG.-PERIODIC ANTENNA – AXL-80S
70 MHz - 4 GHz
With folded elements for immunity tests and emission measurements with limited space
Download Brochure
Frankonia EMI TEST RECEIVER - ERC-6
Full compliant with CISPR 16-1-1, Ed.3.1 - 9 kHz to 6 GHz
Key Features
Frequency-range 9 kHz – 6 GHz
Traditional EMI-receiver mode according to CISPR 16-1
Fast, FFT-based (time domain) EMI-receiver mode acc.
to CISPR 16-1-1, Ed.3.1
Integrated touch-PC, with 10“- monitor
Integrated 20 dB (15 dB> 1 GHz) pre-amplifier
Full-compliant according to CISPR 16-1
Peak, Quasi-Peak, Average,...
Frankonia EMI TEST RECEIVER - ERX-6
Full compliant with CISPR 16-1-1, Ed.3.1 - 10 Hz to 6 GHz
Key Features:
Frequency range 10 Hz to 6 GHz (7 GHz as Option)
Traditional EMI-receiver mode acc. to CISPR 16-1
Ultra-fast FFT-based (time domain) EMI-receiver-mode acc. to CISPR 16-1-1, Ed. 3.1
Real-time Spectrum-Analyzer mode
About 6000 times faster than traditional receivers
Quasi-Peak, Peak, Average, RMS,...
Frankonia GTEM-Cells
acc. to IEC/EN 61000-4-20
Septum-height: 250mm to 2000mm / 0.1 MHz to 18 GHz
Download Brochure
Frankonia Isolation transformer types IT-6/-16/-20
For conducted immunity testing according to IEC/EN 61000-4-16
Technical specifications
IT-6: 230 V , 6A, 1-phase, 330x230x111 mm, 18 kg
IT-16: 230 V , 16A, 1-phase, 400x310x181 mm, 34 kg
IT-20: 230 V , 20A, 1-phase, 400x310x181 mm, 45 kg
Download Brochure
Frankonia LARGE LOOP ANTENNA - LVVL
Key features
Fully compliant with CISPR-15 / EN55015 (Luminaires)
Complete 3-axis design
Simple and fast installation and easy collapsile to sub units
Calibrated
Useable with any EMI receiver or spectrum analyzer
Download Brochure
Frankonia LINE IMPEDANCE STABILIZATION NETWORK‘s - LISN-KFZ
acc. to automotive standards and MIL-STD
Technical Data:
Frequency range: 100 kHz - 150 MHz
Max. cont. current: 70 A
Max. current (limited time): 100 A
Max. voltage DC: 500 V
Max. voltage 50/60 Hz: 250 V
Max. voltage 400 Hz: 130 V
Impedance: (5 µH + 1 fi ) || 50 fi ±10 %
Resistance of coil: < 5 mfi
Impedance at 50 Hz: 4.2 mfi
Impedance at...
Frankonia LINE IMPEDANCE STABILIZATION NETWORK‘s - LISN-MIL
acc. to automotive standards and MIL-STD
Technical Data:
Frequency range: 150 kHz - 100 MHz
Max. cont. current: 70 A
Max. current (limited time): 100 A
Max. voltage DC: 250 V
Max. voltage 50/60 Hz: 250 V
Max. voltage 400 Hz: 140 V
Impedance: (50 µH + 5 ohm ) || 50 ohm ±20 %
DC-Resistance mains-EuT: ca. 10mohm
Weight: 4.5 kg
Connector for receiver: BNC female 50ohm
EuT connector: Wing terminals
Supply connector: Wing...
Frankonia LINE IMPEDANCE STABILIZATION NETWORK‘s LISN C4-32/C2-16
The objective of EMI conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power mains. The mains lines themselves do not allow for reliable EMI measurements since their impedance is subject to marked variations that generates different...