Frankonia DOUBLE STACKED LOG.-PERIODIC ANTENNA – AXL-200
150 MHz – 4 GHz, For immunity tests acc. to automotive standards
The AXL-200 has especially been designed for the generation of high field strength levels acc. to automotive immunity standards. The small dimensions of the antenna does also allow to keep the min. required distance of 25cm to the floor, when testing in vertical polarization.
Frankonia DOUBLE STACKED LOG.-PERIODIC ANTENNA – AXL-80
70 MHz - 4 GHz
For immunity tests and emission measurements
Double-stacked log.-periodic antennas have mainly been developed in order to reach the highest field strength levels acc. to automotive-, avionics- and military standards with as less as possible input power. Antenna gain saves amplifier power!
Frankonia DOUBLE STACKED LOG.-PERIODIC ANTENNA – AXL-80S
70 MHz - 4 GHz
With folded elements for immunity tests and emission measurements with limited space
Frankonia EMI TEST RECEIVER - ERC-6
Full compliant with CISPR 16-1-1, Ed.3.1 - 9 kHz to 6 GHz
Key Features
- Frequency-range 9 kHz – 6 GHz
- Traditional EMI-receiver mode according to CISPR 16-1
- Fast, FFT-based (time domain) EMI-receiver mode acc.
- to CISPR 16-1-1, Ed.3.1
- Integrated touch-PC, with 10“- monitor
- Integrated 20 dB (15 dB> 1 GHz) pre-amplifier
- Full-compliant according to CISPR 16-1
- Peak, Quasi-Peak, Average, RMS, CISPR-Average detectors available (RMS-average optional)
Frankonia EMI TEST RECEIVER - ERX-6
Full compliant with CISPR 16-1-1, Ed.3.1 - 10 Hz to 6 GHz
Key Features:
- Frequency range 10 Hz to 6 GHz (7 GHz as Option)
- Traditional EMI-receiver mode acc. to CISPR 16-1
- Ultra-fast FFT-based (time domain) EMI-receiver-mode acc. to CISPR 16-1-1, Ed. 3.1
- Real-time Spectrum-Analyzer mode
- About 6000 times faster than traditional receivers
- Quasi-Peak, Peak, Average, RMS, RMS-AVG detectors
- Remote control of the receiver, antenna mast and turntable by using our „EM-LAB“ software
- Measurements acc. to CISPR, MIL, DO, VG, and ETSI-standards
- Excellent noisefloor: 120 kHz (Band C/D), Typ. -15 dBµV, 1 MHz (Band E), Typ. <- 3dBµV
Frankonia GTEM-Cells
acc. to IEC/EN 61000-4-20
Septum-height: 250mm to 2000mm / 0.1 MHz to 18 GHz
Frankonia Isolation transformer types IT-6/-16/-20
For conducted immunity testing according to IEC/EN 61000-4-16
Technical specifications
IT-6: 230 V , 6A, 1-phase, 330x230x111 mm, 18 kg
IT-16: 230 V , 16A, 1-phase, 400x310x181 mm, 34 kg
IT-20: 230 V , 20A, 1-phase, 400x310x181 mm, 45 kg
Frankonia LARGE LOOP ANTENNA - LVVL
Key features
- Fully compliant with CISPR-15 / EN55015 (Luminaires)
- Complete 3-axis design
- Simple and fast installation and easy collapsile to sub units
- Calibrated
- Useable with any EMI receiver or spectrum analyzer
Frankonia LINE IMPEDANCE STABILIZATION NETWORK‘s - LISN-KFZ
acc. to automotive standards and MIL-STD
Technical Data:
- Frequency range: 100 kHz - 150 MHz
- Max. cont. current: 70 A
- Max. current (limited time): 100 A
- Max. voltage DC: 500 V
- Max. voltage 50/60 Hz: 250 V
- Max. voltage 400 Hz: 130 V
- Impedance: (5 µH + 1 fi ) || 50 fi ±10 %
- Resistance of coil: < 5 mfi
- Impedance at 50 Hz: 4.2 mfi
- Impedance at 400 Hz: 13 mfi
- Weight: 650g
- Connector EuT: 7mm wing terminals
- RF output: BNC (optional N)
- Dimensions incl. connectors W x H x D: 160mm x 210mm x 165mm
Frankonia LINE IMPEDANCE STABILIZATION NETWORK‘s - LISN-MIL
acc. to automotive standards and MIL-STD
Technical Data:
- Frequency range: 150 kHz - 100 MHz
- Max. cont. current: 70 A
- Max. current (limited time): 100 A
- Max. voltage DC: 250 V
- Max. voltage 50/60 Hz: 250 V
- Max. voltage 400 Hz: 140 V
- Impedance: (50 µH + 5 ohm ) || 50 ohm ±20 %
- DC-Resistance mains-EuT: ca. 10mohm
- Weight: 4.5 kg
- Connector for receiver: BNC female 50ohm
- EuT connector: Wing terminals
- Supply connector: Wing terminals
- Dimensions W x H x D: 220mm x 220mm x 260mm
Frankonia LINE IMPEDANCE STABILIZATION NETWORK‘s LISN C4-32/C2-16
The objective of EMI conducted tests is to define the amplitude of current Ic and Voltage Vc emission from the Device Under Test (DUT) onto the power mains. The mains lines themselves do not allow for reliable EMI measurements since their impedance is subject to marked variations that generates different test results at different test sites. Frankonia´s artificial mains network C2‐16 are LISN‘s, used for RFI measurements on AC single‐phase (C4-32 = AC three-phase), power supplied electric and electronic equipment, drawing up to 16 (32) Amps, which corresponds to the most common applications.
The C2‐16 is a two line (the C4-32 a three line) V‐network with an equivalent circuit of 50 ohm // (5ohm+ 50µH), fully compliant with CISPR publ. 16, VDE 0876 and FCC part 15 regulation. The Frankonia C2‐16 / C4-32 are suited to perform measurements on conductedinterference in the frequency range from 9 kHz to 30 MHz.
Frankonia NEAR-FIELD PROBE SET - NFS-100
NFS-100 includes:
- E probe
- H probe
- BNC adaptor
- Sensitivity plots
- Hard carry case